How to Wear a Saree: Step By Step Guide

Ensure that you are wearing the petticoat (a skirt of the same colour as the saree) and that it is tied correctly around your waist. The majority of your saree will be tucked into this, thus it must be done properly. If you want to wear high heels, do so before to draping; this will help you get the right length and prevent you from tripping over your own pleats.

How to Wear a Saree Step by Step Guide

Step – 1

Beginning from the plain (non-pallu) end, tuck the fag end right below the navel. Continue swaddling from the left side and finish the round from behind till you reach the starting spot.

Step - 2

Bring the saree to the front and create pleats that are about the size of the space between your forefinger and thumb.

Step - 3

Create between four and eight pleats, depending on the fabric. Place the pleats inside the skirt and fix them with a safety pin on the waist's left side. This technique will assist the saree remain intact while you move.

Step – 4

This just leaves the pallu. You now have the option of letting it flow (short or long floating) or folding it into pleats.

Step – 5

For a floating appearance, just bring the pallu to the left side of your shoulder and pin it.  Hold it either at the forearm or leave it. Really, it's a question of choice.

Step – 6

For the pleated appearance, draw the pallu from under the right arm and create vertical pleats (about 5 to 6 inches) with the border (if any) as the initial pleat. Continue throughout the saree's width.

Now, secure it around the left shoulder, leaving at least one metre of excess length.

This technique is the foundation for the majority of the other styles, so if you can master it, you'll be well on your way to being a saree draping ace. Watch the demonstration video below, maybe twice, and you'll be set.

2. Saree Draping in the Style of the Marathi

If done correctly, this traditional Marathi saree drape creates a rustic and country-chic appeal. A look that will cause some heads to turn and get you much-needed attention. This design requires a nine-yard saree as opposed to the standard six yards. In addition, you do not need an underskirt, even if the majority of them wear shorts or knee-length leggings. Wear the nose ring, also known as a "nathni," and accessorise with glass bangles and temple jewellery. Tie your hair in a chignon covered in jasmine blossoms, and flaunt glass bangles and temple jewellery.

How to Drape Saree in Marathi Style Step By Step Guide

Step - 1

Start by placing the saree behind you and holding its plain end in your left hand.

Step - 2

Leaving just under a yard at the left end, make a knot on the right side of the waist, just over the belly button.

Step - 3

Now, pull the shorter end of the loose end from between your legs using the shorter end. If necessary, create narrow pleats and tuck it in towards the back. It is pinned so that it remains undisturbed.

Step - 4

Create pleats by running your fingers down the remaining width of the saree. Pull it from underneath your right arm and pin it to your left shoulder.

Step - 5

You will be left with the exact length required for the pleats. Tuck them gently to the left over the knot towards the waist.

Step - 6

Remember that the length of Marathi-style sarees is an inch above the feet; anything higher or lower might ruin the aesthetic.

3. Saree in the Kerala Style

One of the most elegant-looking sarees that has grown popular outside traditional Kerala weddings. Perhaps an intriguing deviation from the standard bridesmaid clothing. This typical handwoven saree started in a mix of off-white and gold border, but is now available in an array of hues (for the border). If you're contemplating this for your female gang, they may each choose a shirt with a contrasting hue to spice it up.

How to Wear a Kerela Saree Step by Step Guide

This method produces a two-piece (half-saree) result, which is standard for Kerala saree drapery.

Step -1

Place the full saree behind you and bring one end from the left side and the remainder to the right side of your body.

Step - 2

Make about two large pleats and ensure that the gold border is prominent. This should be tucked in at the waist.

Step - 3

In contrast to previous styles, this one has fewer pleats. Adjust them accordingly before proceeding to the next stage.

Step - 4

With the remaining portion of the saree and the pallu border, create thin pleats.

Step - 5

Attach a safety pin to the left side of your shoulder to secure the pleats. This method does not need pulling it from behind the right arm.

Step - 6

Now, remove the right end of the pleated bunch from under your right arm.

Step - 7

Bring this to the left side and tuck it in close to the navel.

Iron any areas of the saree that seem to be protruding, and voila!

4. Retro/Mumtaz-Inspired Saree Draping

Bring back the old vibe in fashion; we could all use a little drama. Particularly die-hard Bollywood fanatics. It is really simple to do. This is perfect for sangeet or mehendi events, or any Bollywood-themed home party. Let's remember about the good old days and sing the superhit song of the day, "Aaj kal tere mere pyar ke," as we destroy the competition.

How to wear a Retro Saree Step by Step Guide

Step - 1

First, we would choose a chiffon or georgette saree with a narrow border due to its form-fitting texture.

Step - 2

To compensate for the somewhat plain saree, a sequined blouse may be worn.

Step - 3

Perform the fundamental tucking of the saree around the waist.

Step - 4

Start making pleats, but create just a few. Put them in place by tucking them underneath your belly button.

Step - 5

Take the remaining portion of the saree and wrap it around your waist similarly to the first round, however the second tuck must be at least four or five inches above the first.

Step - 6

Again, the tuck must be five inches higher than the second level.

Step - 7

With the remaining portion of the saree, create Nivi-style narrow vertical pleats. Pin your right arm to the left side of your shoulder from underneath it.

You're all ready to party it up!

4. Mermaid-Inspired Saree Draping

Another delightful option for new brides, it is the epitome of sophistication. This style matches half-and-half sarees well; an embroidered pallu is even better. This is your finest option if you want to showcase your hourglass body or curves.

How to Wear a Saree Mermaid Style Step By Step Guide

Step - 1

Perform the fundamental initial step of tucking the unbordered portion of the saree neatly around the waist.

Step - 2

Leave an inch at the waist and fasten it. This design lacks pleats.

Step - 3

The leftover fabric will be wrapped around the waist. But first, tuck the beginning of the border into the left side of your waist, just above the navel.

Bring the remainder forward by rotating it around.

Step - 4

Commence creating vertical pleats. They must be the same thickness as the border. As seen below, drape this over the right shoulder and let it to fall in front about a few inches over the floor.

Step - 5

If there is any residual saree, tuck it completely into the saree skirt without forming pleats; it should resemble a skirt.

Step - 6

Now, pull the pallu's left end toward the left shoulder. Remove it from under the arm. Pull it under the pallu and secure it to the inside skirt.

This elegant method of draping a saree may simply make you appear like an expert.

6. Lehenga Style Saree Draping

Abandon the tedious customary drapery and adorn your saree in a festive manner. You will be pleasantly delighted to see how simple it is to pull off a lehenga look with just your standard sarees. With obvious reasons, Georgette or chiffon works well for this design. The lehenga and its associated styles are here to stay, so let's get down to business and master the techniques.

How to wear a Saree Lehenga Style Step by Step Guide

Step - 1

Perform the fundamental initial step of tucking the unbordered portion of the saree neatly around the waist.

Step - 2

When the first round of draping is complete, toss the fabric around the back, leaving a portion for the pleats.

Step - 3

This design does not have any front pleats; they are created at the rear. The rear pleats provide the appearance that the saree is a lehenga.

Step - 4

Make vertical pleats on the remaining portion of the saree, as you would for the Nivi style.

Step - 5

Throw them over your left shoulder to the back and fasten with a safety pin.

Step - 6

Pull the right side of the pleated pallu towards the right shoulder, and then throw it behind you to ensure that the front remains intact.

Step - 7

Back-pleat the leftover fabric and tuck it into your inner skirt.

Step - 8

That's all there is to it, so go ahead and give this a go. Perform it many times, just in case.

Many individuals find it difficult to drape a saree correctly. However, practice makes perfect. You are surely not the only person to be terrified by saree draping after reading this essay. We have arranged everything for you. You just need to learn how to wear a saree by following the instructions precisely. Additionally, be patient while doing so. Once you master the skill of saree drapery, you will be closer to standing out from the crowd.

Do we seem obese in saree?

If draped properly, sarees will not make you seem overweight. However, this also relies on the fabric, colour, and pattern of the saree.

Which saree colour helps you seem slimmer?

Typically, darker hues provide a leaner appearance than brighter ones.

How is pallu referred to in English?

In English, the pallu of a saree is known as an end-piece.

What is the Best Place to Buy Ethnic Wear?

The best place to buy ethnic wear for women is Kanchan Fashion

 Address: Shop no. 773, Nai Sarak, ChandnI Chowk, Old Delhi

Instagram

Related Posts

Top 150+ Frosty Flair Earrings: Cool & Chic Charms

Table of Contents Introduction What Are Frosty Flair Earrings? Types of Frosty Flair Earrings 1. Sparkling Studs 2...

Read More